Введение
Prereq for display assembly.
Выберете то, что вам нужно
-
-
Use the tip of a spudger to push the iSight camera cable connector straight away from its socket on the logic board.
-
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
Еще один человек закончил это руководство.
This was the hardest part of the repair for me. The iSight cable was really lodged in its socket. "Walking" the connector as the guide suggests -- i.e. pushing on each side alternately at a 45 degree angle (with more force than I expected) -- eventually worked.
Katherine Agnew - Ответить