Введение
This guide has been updated by iFixit staff! Read the new, official guide here.
Выберете то, что вам нужно
-
-
Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:
-
Red Seven 3 mm Phillips screws.
-
Orange Three 13.5 mm Phillips screws.
-
-
-
Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.
-
-
-
Remove the following tri-wing screws securing the battery to the upper case:
-
Red One 5.5 mm tri-wing screw
-
Orange One 13.5 mm tri-wing screw.
-
-
-
-
Use the flat end of a spudger to lift the battery connector up out of its socket on the logic board.
-
-
-
Remove the ribbon cable by releasing it from the ZIF connector on the underside of the trackpad and also from the socket that attaches it to the logic board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
8 участников успешно повторили данное руководство.
Команда
2 Комментариев
I accidentally disabled my track pad in the system preferences how do I enable it again when the trackpad wont click?
