Перейти к основному содержанию


Replace the lower case in your MacBook Pro 13" Unibody Mid 2010.

  1. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Remove the lower case screws: step 1, image 1 of 1
    • Remove the following 10 screws securing the lower case to the MacBook Pro 13" Unibody:

    • Seven 3 mm Phillips screws.

    • Three 13.5 mm Phillips screws.

  2. MacBook Pro 13" Unibody Mid 2010 Lower Case Replacement, Lift the lower case away: step 2, image 1 of 1
    • Slightly lift the lower case and push it toward the rear of the computer to free the mounting tabs.


To reassemble your device, follow these instructions in reverse order.

41 участников успешно повторили данное руководство.

Один комментарий

Those are actually not seven identical 3 mm screws. The screw located at the ventilation side next to the three 13.5 mm screws does not have a shaft as compared to the other six 3 mm screws.

glaubitz - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 4

За последние 7 дней: 21

За последние 30 дней: 71

За всё время: 37,896