Введение

Pre-req only

Запчасти

Никакие детали не требуются.

  1. Peel back the warning label covering the battery connector.
    • Peel back the warning label covering the battery connector.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board. Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.
    • Using the flat end of a spudger, gently pry the battery connector straight up out of its socket on the logic board.

    • Bend the battery cables back and out of the way, ensuring that the battery connector doesn't accidentally make contact with the logic board.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Brett Hartt

Участник с: 12.04.2010

110 637 Репутация

Автор 138 руководств

Команда

iFixit Member of iFixit

Community

108 членов

Автор 8 310 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 5

За всё время: 370