Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

While it may not be the first component that people gawk over when they see your fancy Retina display MacBook Pro, a nasty looking lower case can be a real eye-sore. Use this guide to help you replace a scratched, scuffed, bent or broken bottom panel.

  1. Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:
    • Remove the following P5 pentalobe screws securing the lower case to the MacBook Pro:

    • Eight 3.0 mm

    • Two 2.3 mm

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  3. Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.
    • Lifting from the edge nearest the clutch cover, lift the lower case off the MacBook Pro.

    • Set the lower case aside.

Заключение

To reassemble your device, follow these instructions in reverse order.

25 участников успешно повторили данное руководство.

Brett Hartt

Участник с: 12.04.2010

117 677 Репутация

Автор 143 руководств

Команда

iFixit Участник iFixit

Community

130 членов

Автор 12 424 руководств

Комментариев: 2

i am willing to buy one backplate but i am unable to find somewhere on the internet to buy it, can some one please help me out with this? Thanks :D

Joan Manuel Rodriguez - Ответить

Managed to clean six years worth of dust out, now the fans are much quieter! The keyboard is also cooler to the touch on idle. Thanks!

Austin Wang - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 11

За последние 7 дней: 101

За последние 30 дней: 421

За всё время: 47,163