Введение
This guide will show you how to quickly and easily replace the carbon brushes in a Makita GA4030k angle grinder.
Выберете то, что вам нужно
-
-
-
Use a spudger to move the springs (holding the brushes) to the side.
-
-
-
Use needle nose pliers to gently pull out the carbon brushes by their crimped connectors.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Отменить: Я не выполнил это руководство.
3 участников успешно повторили данное руководство.