Перейти к основному содержанию

Megawheels S10 Rear Mudguard Replacement

Выберете то, что вам нужно

  1. Megawheels S10 Rear Mudguard Replacement, Rear Mudguard: шаг 1, изображение 1 из 1
    • Hold down the power button and wait for a beep to ensure that the scooter is turned off.

  2. Megawheels S10 Rear Mudguard Replacement: шаг 2, изображение 1 из 1
    • Put up the kickstand so that the scooter is upright.

  3. Megawheels S10 Rear Mudguard Replacement: шаг 3, изображение 1 из 1
    • Unscrew the old mudguard.

  4. Megawheels S10 Rear Mudguard Replacement: шаг 4, изображение 1 из 1
    • Grip the wheel and pull off the mudguard.

  5. Megawheels S10 Rear Mudguard Replacement: шаг 5, изображение 1 из 1
    • Remove the connector.

  6. Megawheels S10 Rear Mudguard Replacement: шаг 6, изображение 1 из 1
    • Attach the new mudguard's power connector.

  7. Megawheels S10 Rear Mudguard Replacement: шаг 7, изображение 1 из 1
    • Line up the new mudguard with the screw holes and reinsert the screws.

Заключение

If these steps are followed correctly, then your manual break and tail light should function good as new!

Andrew DiCapo

Участник с: 09/28/21

145 Репутация

1 руководство автора

Команда

University of North Texas, Team 2-9, Raign Fall 2021 Участник University of North Texas, Team 2-9, Raign Fall 2021

UNT-RAIGN-F21S2G9

2 членов

Автор 1 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 4

За последние 7 дней: 12

За последние 30 дней: 31

За всё время: 1,124