Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.
Выберете то, что вам нужно
-
Этот шаг не переведен. Помогите перевести
-
Then move the shift lever all the way back in to L to give you room to work.
-
-
-
Этот шаг не переведен. Помогите перевести
-
Now push down on the tab that is at the center of the ash tray assembly.
-
-
Этот шаг не переведен. Помогите перевести
-
While continuing to hold down the tab you can pull the ash tray forward, and out of the opening it sits in.
-
-
Этот шаг не переведен. Помогите перевести
-
If you want to remove the entire assembly including the bracket that the ash tray rests in you can proceed to remove the two screws that hold it to the center console.
-
Отменить: Я не выполнил это руководство.
14 участников успешно повторили данное руководство.
4 Комментариев
What would be the purpose of removing ashtray ?
It provides access to the portion of the center console behind the ash tray. There is wiring back there. It can also help with the removal of the shift gate panel.
Removal of ashtray is also necessary to access the lamp which illuminates the cavity. After taking ashtray out, remove two Philips (+) screws, then separate metal cover from plastic housing. Next to the lighter housing is light socket. It holds a 12 volt, 2 watt, T2 bayonet base, #1272 lamp. Push, then twist lamp to remove. Clean copper terminal at side of socket as well as moving contact on side of ashtray housing. This lamp is same type as used for automatic shift indicator. This is one of the most overlooked lamps in a W123 chassis. Tip: while metal cover is removed, clean and scrub ashtray, it is much easier to access this way.