Перейти к основному содержанию

MerchSource the Black Series Boat Racer Gaskets Replacement

Выберете то, что вам нужно

  1. MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: шаг 1, изображение 1 из 2 MerchSource the Black Series Boat Racer Gaskets Replacement, Gaskets: шаг 1, изображение 2 из 2
    • Remove the screw on the top of the boat at the rear end using a Phillips #2 screwdriver.

    • Screw length is 16 mm.

  2. MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 2, изображение 1 из 3 MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 2, изображение 2 из 3 MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 2, изображение 3 из 3
    • Remove the top of the boat by sliding it backwards and then pulling it off.

  3. MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 3, изображение 1 из 2 MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 3, изображение 2 из 2
    • Grab the rubber gasket with tweezers and pull it out of the slot.

  4. MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 4, изображение 1 из 3 MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 4, изображение 2 из 3 MerchSource the Black Series Boat Racer Gaskets Replacement: шаг 4, изображение 3 из 3
    • Gently remove the gasket and replace with a new one.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Monica Reece

Участник с: 08/31/18

672 Репутация

Автор 5 руководств

Команда

Western Carolina University, Team S1-G3, Virtue Fall 2018 Участник Western Carolina University, Team S1-G3, Virtue Fall 2018

WCU-VIRTUE-F18S1G3

4 членов

Автор 10 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 2

За последние 30 дней: 2

За всё время: 259