Введение
In order to replace the Surface 3 tablet's speakers you will have to remove the casing, undo the adhesive that holds the speakers down, and disconnect the speakers from the motherboard.
Выберете то, что вам нужно
-
-
Warm up an iOpener following the instructions found in the iOpener guide.
-
Place the warm iOpener on top of the edges of the screen. This heat will weaken the strength of the adhesive between the display and body.
-
-
-
Use iFixit opening picks to wedge under the edge of the screen at the speaker port.
-
-
-
Carefully try to work your way around the device using the picks, reapplications of the heated iOpener, and luck.
-
-
-
-
You will be working in these areas of the Surface 3 in order to replace the speakers.
-
-
-
Use a pick to get under the speaker part and undo the adhesive that keeps it attached to the back casing.
-
-
-
Use the pick to gently lift on the red and black wire in order to dislodge the connection between the speaker wire and the motherboard.
-
-
-
Simply replace the old speakers by snapping the new speakers into place and connecting the red and black wire to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Cal Poly, Team 5-12, Maness Fall 2015 Участник Cal Poly, Team 5-12, Maness Fall 2015
CPSU-MANESS-F15S5G12
4 членов
Автор 18 руководств
