Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

In this guide, we will be replacing the kickstand on a Microsoft Surface Pro 2. The procedure is quite simple and does not require taking the screen off of the device, so you won’t need to deal with heat or prying at all. Follow this guide if your kickstand is damaged by impact or stress and needs to be replaced.

  1. Lift the kickstand up from the back of the device to reveal the hinges.
    • Lift the kickstand up from the back of the device to reveal the hinges.

    • Remove the single Torx T5 screw from each hinge (two total).

  2. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  3. Gently pull the kickstand away from the device. This will release the three tabs from the slots on the back of the device. Gently pull the kickstand away from the device. This will release the three tabs from the slots on the back of the device.
    • Gently pull the kickstand away from the device. This will release the three tabs from the slots on the back of the device.

Заключение

To reassemble your device, follow these instructions in reverse order.

Austin Blakely

Участник с: 11.03.2019

4 767 Репутация

Автор 25 руководств

Команда

iFixit Участник iFixit

Community

130 членов

Автор 12 504 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 12

За последние 30 дней: 66

За всё время: 406