Перейти к основному содержанию

Microsoft Surface Pro 5 Kickstand Replacement

Выберете то, что вам нужно

  1. Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: шаг 1, изображение 1 из 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: шаг 1, изображение 2 из 3 Microsoft Surface Pro 5 Kickstand Replacement, Kickstand: шаг 1, изображение 3 из 3
    • Lift the kickstand about 90º to reveal the hinges.

  2. Microsoft Surface Pro 5 Kickstand Replacement: шаг 2, изображение 1 из 2 Microsoft Surface Pro 5 Kickstand Replacement: шаг 2, изображение 2 из 2
    • Remove the four 2.7 mm T3 Torx screws, two from each hinge.

  3. Microsoft Surface Pro 5 Kickstand Replacement: шаг 3, изображение 1 из 2 Microsoft Surface Pro 5 Kickstand Replacement: шаг 3, изображение 2 из 2
    • Lower the kickstand to about a 15-30º angle from the device.

    • Gently pull the kickstand away from the device, rocking left to right to disengage the adhesive tabs connecting the kickstand to the device.

    • During reassembly, be sure to reinsert the two adhesive tabs into the slots on the back of the device before installing the screws in the hinges.

Заключение

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Еще один человек закончил это руководство.

Sarah Westberg

Участник с: 03/11/19

22 711 Репутация

Автор 70 руководств

Команда

iFixit Участник iFixit

Staff

136 членов

Автор 16 562 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 12

За последние 30 дней: 54

За всё время: 6,315