Введение

This installation guide should be used when the batteries for the radio are out of power and new batteries need to be installed. The troubleshooting guide for this process can be found here.

Запчасти

Никакие детали не требуются.

  1. First, apply pressure with your thumb on the top of the battery cover.
    • First, apply pressure with your thumb on the top of the battery cover.

  2. Next, pull down on the cover until it begins to slide.
    • Next, pull down on the cover until it begins to slide.

  3. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  4. Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).
    • Finally, once the cover is completely off, pry up the old batteries with your finger or a strong, skinny tool (i.e. spudger).

  5. Put the new batteries into their slots in the back case.
    • Put the new batteries into their slots in the back case.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

James Tucker Dunn

Участник с: 18.01.2013

371 Репутация

Автор 6 руководств

Команда

Cal Poly, Team 19-43, Regan Winter 2013 Member of Cal Poly, Team 19-43, Regan Winter 2013

CPSU-REGAN-W13S19G43

3 членов

Автор 9 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 1

За 7 дней: 9

За 30 дней: 48

За всё время: 6,654