Перейти к основному содержанию

Motorola Droid Turbo Headphone Jack Replacement

Выберете то, что вам нужно

  1. Motorola Droid Turbo Headphone Jack Replacement, Rear Case: шаг 1, изображение 1 из 1
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Motorola Droid Turbo Headphone Jack Replacement: шаг 2, изображение 1 из 2 Motorola Droid Turbo Headphone Jack Replacement: шаг 2, изображение 2 из 2
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Motorola Droid Turbo Headphone Jack Replacement, Midframe: шаг 3, изображение 1 из 1
    • Remove the midframe bezel.

  4. Motorola Droid Turbo Headphone Jack Replacement: шаг 4, изображение 1 из 1
    • Remove the four Torx T5 screws securing the midframe plate.

  5. Motorola Droid Turbo Headphone Jack Replacement: шаг 5, изображение 1 из 1
    • Remove the midframe.

  6. Motorola Droid Turbo Headphone Jack Replacement, Headphone Jack: шаг 6, изображение 1 из 2 Motorola Droid Turbo Headphone Jack Replacement, Headphone Jack: шаг 6, изображение 2 из 2
    • Insert the pointed end of a spudger into the headphone jack, and gently pry the jack up and away from the midframe.

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Geoff Wacker

Участник с: 09/30/13

89 895 Репутация

Автор 89 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 3,291