Перейти к основному содержанию

Введение

Use this guide to remove the midframe on your Motorola Droid Turbo.

  1. Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.
    • Prepare an iOpener and lay it over the rear case to soften the adhesive on securing the rear case to the phone.

  2. Use a plastic opening tool to pry the rear case off of the rest of the device. Remove the rear case.
    • Use a plastic opening tool to pry the rear case off of the rest of the device.

    • Remove the rear case.

    • The wireless charging coil may try to stick to the rear case, so make sure to remove it from the case before fully separating the rear case from the rest of the device.

  3. Remove the midframe bezel.
    • Remove the midframe bezel.

  4. Remove the four Torx T5 screws securing the midframe plate.
    • Remove the four Torx T5 screws securing the midframe plate.

  5. Remove the midframe.
    • Remove the midframe.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Geoff Wacker

Участник с: 30.09.2013

79 065 Репутация

Автор 89 руководств

Один комментарий

Which circuits depend of the midframe?

gabriel.mourasant - Ответить

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

За всё время: 973