Follow this guide to remove and replace the USB board.


Никакие детали не требуются.

  1. pull back plate off starting with this tab
    • pull back plate off starting with this tab

  2. remove 16 00 philips screws
    • remove 16 00 philips screws

    • pull up sticker with tweezers to reveal the last screw

    • no screw here

    • remove battery sd card, and sim card

    • disconnect antenna with spudger

    • disconnect data cable with spudger

    • Remove 2 00 philips screws

    • carefully remove USB board and vibrator together

    • disconnect vibrator from board with spudger.

    • Pull the rubber support gasket off of the old usb port.


To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Michael Cottone

Участник с: 09.09.2017

701 Репутация

Автор 2 руководств


Cottone Computing Member of Cottone Computing


1 член

Автор 2 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 2

За 7 дней: 8

За 30 дней: 36

За всё время: 459