Введение

Follow this guide to replace a scratched or worn back cover for the Motorola Moto G5.

Запчасти

Никакие детали не требуются.

  1. Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.
    • Insert your fingernail or the flat end of a spudger into the notch on the bottom edge of the phone near the charging port.

    • Pry with your fingernail or twist the spudger to release the back cover from the phone.

  2. Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.
    • Insert the flat end of a spudger into the seam and slide it along the bottom edge to release the clips holding the back cover to the phone.

    • Continue sliding the flat end of the spudger along the seam for the remaining sides of the phone.

    • Lift the back cover and remove it from the phone.

    • To reinstall the back cover, align the cover with the phone and squeeze along the edges to snap the clips back into place.

Заключение

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Check out our Motorola Moto G5 Answers community for troubleshooting help.

Arthur Shi

Участник с: 03.01.2018

32 122 Репутация

Автор 104 руководств

Команда

iFixit Member of iFixit

Community

108 членов

Автор 7 531 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 5

За 7 дней: 22

За 30 дней: 96

За всё время: 586