Перейти к основному содержанию

Введение

This guide will show users how to replace a defective or damaged rear camera lens in the Motorola Moto G7 Play. This guide applies to both the XT1952-3 and XT1952-2 models. The rear camera lens is capable of taking 13MP photos as well as 1080p video. Users may need to replace the camera if the lens is badly damaged. A damaged lens affects photo quality in the camera.

Запчасти

Детали не указаны.

  1. Motorola Moto G7 Play Camera Replacement, Back Cover: step 1, image 1 of 2 Motorola Moto G7 Play Camera Replacement, Back Cover: step 1, image 2 of 2
    • Turn off your device before you begin.

    • Use the iFixit pick to break the adhesive around the back case.

    • Use a heat gun, hairdryer, or iOpener to weaken the adhesive around the back case. If you're using the iOpener, please review the instructions for proper use.

  2. Motorola Moto G7 Play Camera Replacement: step 2, image 1 of 1
    • Detach the back case from the phone.

    • Make sure the back is opened right to left so the cable of the fingerprint scanner does not get damaged.

  3. Motorola Moto G7 Play Camera Replacement: step 3, image 1 of 2 Motorola Moto G7 Play Camera Replacement: step 3, image 2 of 2
    • Use the iFixit pick and the iFixit opening tool to pull the fingerprint scanner off of the back case.

  4. Motorola Moto G7 Play Camera Replacement, Camera: step 4, image 1 of 1
    • Remove the nine 3.2mm screws from the motherboard cover with a Phillips #00 screwdriver.

  5. Motorola Moto G7 Play Camera Replacement: step 5, image 1 of 1
    • Lift the motherboard cover from the bottom.

    • Use reverse tweezers or a similar tool if needed.

  6. Motorola Moto G7 Play Camera Replacement: step 6, image 1 of 2 Motorola Moto G7 Play Camera Replacement: step 6, image 2 of 2
    • Once the motherboard cover is removed, use the iFixit opening tool to disconnect the ribbon cable connecting the camera to the motherboard.

    • The camera can now be removed and is ready to be replaced.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

Monserath Casillas

Участник с: 10.02.2020

1 101 Репутация

Автор 5 руководств

Команда

Cal Poly, Team S7-G4, Regan Winter 2020 Участник Cal Poly, Team S7-G4, Regan Winter 2020

CPSU-REGAN-W20S7G4

5 членов

Автор 12 руководств

Один комментарий

My camera stopped working after water damage. Replacing the camera itself didn’t fix it. What could the problem be?

abb - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 27

За всё время: 699