Перейти к основному содержанию

Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement

Выберете то, что вам нужно

  1. Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: шаг 1, изображение 1 из 3 Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: шаг 1, изображение 2 из 3 Motorola RAZR2 v9m Flip-stop Bumper Pad Replacement, Flip-stop Bumper Pad: шаг 1, изображение 3 из 3
    • Gently press the pointy end of the spudger into the edge of the bumper until it bows and separates from the phone.

    • The bumper is held in place with adhesive. If you plan on reusing the bumper, then use clean tools to keep the surface sticky.

    • Grab the bowed portion of bumper. Gently lift and peel the bumper away from the phone.

    • Remember that the bumper will be sticky. Place it somewhere clean if you will be reusing it.

Заключение

To reassemble your device, follow these instructions in reverse order.

Еще один человек закончил это руководство.

John T Roller

Участник с: 06/04/13

800 Репутация

Автор 6 руководств

Команда

University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013 Участник University of Kentucky Louisville, Team 1-2, Chamberlain Spring 2013

LOUISVILLE-CHAMBERLAIN-S13S1G2

2 членов

Автор 7 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 400