Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Введение

How to replace a faulty antenna.

  1. Depress the silver button. Pull from top of phone to lift the cover.
    • Depress the silver button.

    • Pull from top of phone to lift the cover.

  2. Hold battery from both sides at the bottom. Push upwards and gently lift to remove.
    • Hold battery from both sides at the bottom.

    • Push upwards and gently lift to remove.

  3. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Купить сейчас

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Купить сейчас
  4. Remove the four screws from the corners using a T-6 screwdriver.
    • Remove the four screws from the corners using a T-6 screwdriver.

    • NOTE: Bottom two screws are gold.

    • NOTE: Make sure screws return to correct place when reassembling.

  5. Use spudger to pry up back cover from the two side clips. NOTE: sticker might be attached to rest of phone.
    • Use spudger to pry up back cover from the two side clips.

    • NOTE: sticker might be attached to rest of phone.

  6. Flip over the back cover. Remove the plastic frame. Remove the plastic frame.
    • Flip over the back cover.

    • Remove the plastic frame.

  7. Lift up antenna. Lift up antenna.
    • Lift up antenna.

Заключение

To reassemble your device, follow these instructions in reverse order.

Ryan Kuroiwa

Участник с: 10.04.2010

1 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 25-86, Amido Spring 2010 Участник Cal Poly, Team 25-86, Amido Spring 2010

CPSU-AMIDO-S10S25G86

5 членов

Автор 10 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 1

За всё время: 1,712