Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Введение

This guide shows how to take apart the front casing. This allows access to the front LCD screen.

Запчасти

Детали не указаны.

  1. Push in and hold small release latch.
    • Push in and hold small release latch.

    • Hold the latch through step 2.

  2. While holding the release latch, use a opening tool to help you slide off the front cover. While holding the release latch, use a opening tool to help you slide off the front cover. While holding the release latch, use a opening tool to help you slide off the front cover.
    • While holding the release latch, use a opening tool to help you slide off the front cover.

  3. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Remove the two Philips screws at top of phone with a #1 Philips screwdriver. Remove the two Philips screws at top of phone with a #1 Philips screwdriver.
    • Remove the two Philips screws at top of phone with a #1 Philips screwdriver.

  5. Use a opening tool to gently pry off black cover, revealing the internal LCD display. Use a opening tool to gently pry off black cover, revealing the internal LCD display. Use a opening tool to gently pry off black cover, revealing the internal LCD display.
    • Use a opening tool to gently pry off black cover, revealing the internal LCD display.

Заключение

To reassemble your device, follow these instructions in reverse order.

Eric Freeman

Участник с: 26.01.2010

1 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 8-48, Regan Winter 2010 Участник Cal Poly, Team 8-48, Regan Winter 2010

CPSU-REGAN-W10S8G48

4 членов

Автор 13 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 2,188