Введение

The metal support plate must be removed in order to get to the phone speaker for removal.

Запчасти

Никакие детали не требуются.

  1. Place thumb on the rubber tab on the lower back of the phone.
    • Place thumb on the rubber tab on the lower back of the phone.

    • Push away from the phone to release back panel.

  2. Lift the back panel of the phone to expose battery (not shown here).
    • Lift the back panel of the phone to expose battery (not shown here).

  3. Pull antenna up, away from the phone, to reveal two of six screws.
    • Pull antenna up, away from the phone, to reveal two of six screws.

  4. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  5. Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.
    • Unscrew all six 5.4 mm screws on the back side of the phone using the T-6 screwdriver bit.

  6. Gently separate the front and back sides of the phone. Be careful not to break or bend the ribbon cables.
    • Gently separate the front and back sides of the phone.

    • Be careful not to break or bend the ribbon cables.

  7. Detach the first ribbon cable by unplugging it from the logic board. Detach the first ribbon cable by unplugging it from the logic board.
    • Detach the first ribbon cable by unplugging it from the logic board.

  8. Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone. Gently remove the side button by pulling the buttons away from the phone.
    • Gently remove the side button by pulling the buttons away from the phone.

  9. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone. Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.
    • Grab the tab at the bottom of the metal plate, and pull to remove the plate from the phone.

Заключение

To reassemble your device, follow these instructions in reverse order.

Haley S

Участник с: 11.03.2013

10 Репутация

Автор 4 руководств

Команда

Clemson, Team 13-6, Benson Spring 2013 Member of Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 членов

Автор 10 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 89