Введение

This guide will install the motherboard, which will require removal of the battery and disconnection of the speaker and microphone ribbon cables.

Запчасти

Никакие детали не требуются.

  1. Place thumb on the rubber tab on the lower back of the phone.
    • Place thumb on the rubber tab on the lower back of the phone.

    • Push away from the phone to release back panel.

    Добавить комментарий

  2. Lift the back panel of the phone to expose battery (not shown here).
    • Lift the back panel of the phone to expose battery (not shown here).

    Добавить комментарий

    • Pull the antenna up to reveal two of the six screws.

    Добавить комментарий

    • Unscrew all six screws on the back side of the phone using a T-6 bit.

    Добавить комментарий

    • Gently separate the front and back sides of the phone, as shown in the picture.

    • Be careful not to break or bend the ribbon cables.

    Добавить комментарий

    • Detach the first ribbon cable by unplugging it from the motherboard.

    Добавить комментарий

    • Detach the speaker ribbon cable from the motherboard.

    Добавить комментарий

    • Remove the motherboard from the front half of the phone by gently shaking it loose. It should come out with little to no trouble.

    Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ariel

Участник с: 11.03.2013

16 Репутация

Автор 4 руководств

Команда

Clemson, Team 13-6, Benson Spring 2013 Member of Clemson, Team 13-6, Benson Spring 2013

CLEM-BENSON-S13S13G6

3 членов

Автор 10 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 89