Перейти к основному содержанию

Moultrie I45 GameSpy Buttons Replacement

Выберете то, что вам нужно

  1. Moultrie I45 GameSpy Buttons Replacement, Casing: шаг 1, изображение 1 из 1
    • Using a Philips head screwdriver, remove the eight 6mm screws located at the bottom of the device.

  2. Moultrie I45 GameSpy Buttons Replacement: шаг 2, изображение 1 из 1
    • Remove the butterfly nut from the lid arm.

  3. Moultrie I45 GameSpy Buttons Replacement: шаг 3, изображение 1 из 1
    • Remove the lid-covering.

  4. Moultrie I45 GameSpy Buttons Replacement: шаг 4, изображение 1 из 1
    • Using a Phillips head screwdriver, remove the six 4mm screws from the face of the camera.

  5. Moultrie I45 GameSpy Buttons Replacement: шаг 5, изображение 1 из 1
    • Gently separate the two halves of the case.

    • The two halves are connected by a wire. Pulling too roughly can damage the wires and cause the camera to stop functioning.

  6. Moultrie I45 GameSpy Buttons Replacement, Buttons: шаг 6, изображение 1 из 1
    • Using a Phillips head screwdriver, remove the twelve 3mm screws from the circuit board.

  7. Moultrie I45 GameSpy Buttons Replacement: шаг 7, изображение 1 из 1
    • Gently remove the circuit board from the face of the camera.

  8. Moultrie I45 GameSpy Buttons Replacement: шаг 8, изображение 1 из 1
    • Remove the buttons.

Заключение

To reassemble your device, follow these instructions in reverse order.

Sean Hill

Участник с: 01/29/15

485 Репутация

Автор 4 руководств

Команда

UW Tacoma, Team 3-7, Rose Winter 2015 Участник UW Tacoma, Team 3-7, Rose Winter 2015

UWT-ROSE-W15S3G7

3 членов

Автор 4 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 414