Перейти к основному содержанию

Munchkinz Speaker Replacement

Выберете то, что вам нужно

  1. Munchkinz Speaker Replacement, Opening Device: шаг 1, изображение 1 из 1
    • Insert spudger into the USB Micro slot and pry the case apart.

    • Be careful not to go too deep and bend the prong inside the Micro USB port.

  2. Munchkinz Speaker Replacement, Pry Device Apart: шаг 2, изображение 1 из 2 Munchkinz Speaker Replacement, Pry Device Apart: шаг 2, изображение 2 из 2
    • Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.

    • Gently separate the case so none of the cords inside are disconnected

  3. Munchkinz Speaker Replacement, Separated Device: шаг 3, изображение 1 из 1
    • After prying the device apart, it should look like this.

  4. Munchkinz Speaker Replacement, Pry Speaker: шаг 4, изображение 1 из 2 Munchkinz Speaker Replacement, Pry Speaker: шаг 4, изображение 2 из 2
    • Use the slim plastic opening tool to remove the speaker from its position on the case.

  5. Munchkinz Speaker Replacement, Locate Wires: шаг 5, изображение 1 из 1
    • Locate the red and black wires that connect the speaker to the motherboard.

  6. Munchkinz Speaker Replacement, Solder Wires: шаг 6, изображение 1 из 1
    • Un-solder the red and black speaker wires that are connected to the motherboard

Заключение

To reassemble your device, follow these instructions in reverse order.

David Wood

Участник с: 02/05/15

440 Репутация

Автор 4 руководств

Команда

UW Tacoma, Team 3-6, Rose Winter 2015 Участник UW Tacoma, Team 3-6, Rose Winter 2015

UWT-ROSE-W15S3G6

3 членов

Автор 14 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 4

За всё время: 153