Введение

Removing the lower case allows you to replace the hardware inside the device.

Запчасти

Никакие детали не требуются.

  1. Turn the device so that the bottom is facing up.
    • Turn the device so that the bottom is facing up.

  2. Use the plastic opening tool to carefully lift the rubber stops in each corner. Do not completely remove the rubber stops, because they are difficult to replace. Do not completely remove the rubber stops, because they are difficult to replace.
    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device. Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.
    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  5. Lift the lower case straight up from the rest of the router. Lift the lower case straight up from the rest of the router.
    • Lift the lower case straight up from the rest of the router.

Заключение

To reassemble your device, follow these instructions in reverse order.

Nicole Slagle

Участник с: 25.01.2013

77 Репутация

Автор 2 руководств

Команда

Cal Poly, Team 3-31, Amido Winter 2013 Member of Cal Poly, Team 3-31, Amido Winter 2013

CPSU-AMIDO-W13S3G31

3 членов

Автор 6 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 326