Введение

By removing the case you will be able to install a capacitor or an antenna.

Запчасти

Никакие детали не требуются.

  1. Rotate the device so that the bottom is facing up.
    • Rotate the device so that the bottom is facing up.

  2. Lift up all four rubber pads on the bottom of the router with the plastic opening tool.
    • Lift up all four rubber pads on the bottom of the router with the plastic opening tool.

    • Be careful not to pull the rubber pads all the way out when lifting as they are difficult to reinsert.

    • Unscrew the four 11.8 mm T-8 torx screws from the bottom of the router.

    • Lift the bottom casing straight up from the router.

Заключение

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Ryan Murphy

Участник с: 03.10.2011

482 Репутация

Автор 4 руководств

Команда

Cal Poly, Team 21-24, Maness Fall 2011 Member of Cal Poly, Team 21-24, Maness Fall 2011

CPSU-MANESS-F11S21G24

4 членов

Автор 6 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 5

За всё время: 1,203