Введение
This guide deals with an important prerequisite, the removal of the flow sensor. Once removed, many more components can be accessed on the top of the e500 ventilator. This step is very simple, but must be done carefully as there are a lot of exposed parts in the process. For more information refer to page 43 of the service manual.
Выберете то, что вам нужно
-
-
Remove the three screws and washers that secure the flow sensor cover to the pneumatic box assembly. Retain the hardware for re-assembly.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Команда
Cal Poly, Team S7-G16, Paton Spring 2020 Участник Cal Poly, Team S7-G16, Paton Spring 2020
CPSU-PATON-S20S7G16
3 членов
Автор 13 руководств
