Введение

If there is a power problem, you may need to reattach wires to the battery compartment or replace it completely. If the problem is Corrosion, just see the guide on corrosion.

    • In this guide we will be referring to 'left' and 'right' as though the camera's front (the part that says Nikon) is facing you.

    • Unscrew the large metal screw on the left side using a quarter and remove the battery cover.(Picture not available)

  1. Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.
    • Use a 00 Phillips head screwdriver to remove the small screw on the far left of the battery compartment.

  2. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  3. Pull up on the tab to remove the batteries.
    • Pull up on the tab to remove the batteries.

    • Note: The batteries will probably fall out of their holder.

  4. Use a 00 Phillips head screwdriver to remove the four screws from inside the case.
    • Use a 00 Phillips head screwdriver to remove the four screws from inside the case.

  5. Remove the battery compartment from the camera.
    • Remove the battery compartment from the camera.

    • Note: On some models, the compartment is soldered in by the wires shown. If so you will need to desolder them.

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Zachary Phillips

Участник с: 08.04.2011

205 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 25-26, Garner Spring 2011 Member of Cal Poly, Team 25-26, Garner Spring 2011

CPSU-GARNER-S11S25G26

3 членов

Автор 7 руководств

Один комментарий

Hey, i lost the bracket… do u guys have any idea where could i get one?

David mate - Ответить

Просмотр статистики:

За 24 часа: 2

За 7 дней: 21

За 30 дней: 88

За всё время: 10,071