Почините Свои Вещи Присоединяйтесь к сообществу Магазин

Nintendo Game Boy Advance SP Brightness Switch Replacement

Введение

The brightness switch is the circular button with a sun symbol engraved into it. The brightness switch is located at the top of the button panel.

Выберете то, что вам нужно

  1. Nintendo Game Boy Advance SP Brightness Switch Replacement, Battery: шаг 1, изображение 1 из 1

    • Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

    Редактировать

  2. Nintendo Game Boy Advance SP Brightness Switch Replacement: шаг 2, изображение 1 из 1

    • Lift the battery cover up and remove it from the device.

    • The screw will remain attached to the battery cover because of Nintendo's design.

    Редактировать

  3. Nintendo Game Boy Advance SP Brightness Switch Replacement: шаг 3, изображение 1 из 1

    • Use your fingers or a plastic opening tool to remove the battery from the device.

    • Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

    Редактировать

  5. Nintendo Game Boy Advance SP Brightness Switch Replacement, Back Cover: шаг 4, изображение 1 из 2 Nintendo Game Boy Advance SP Brightness Switch Replacement, Back Cover: шаг 4, изображение 2 из 2

    • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

    • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

    Редактировать

  6. Nintendo Game Boy Advance SP Brightness Switch Replacement: шаг 5, изображение 1 из 1

    • Lift the back cover off of the device.

    • Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.

    • Look out for the power switch that can fall out when taking the back cover off.

    Редактировать

  7. Nintendo Game Boy Advance SP Brightness Switch Replacement, Motherboard: шаг 6, изображение 1 из 1

    • Using a Phillips #00 screwdriver, remove the three Phillips #00 4 mm long screws that hold the motherboard to the button panel.

    Редактировать

  8. Nintendo Game Boy Advance SP Brightness Switch Replacement: шаг 7, изображение 1 из 1

    • Be careful not to tear the ribbon cable that's connected to the screen. If you tear it, games will not appear on the device's screen!

    • Flip the motherboard up and rest it on the other half of the device, so that the back of the buttons are visible as seen in the picture.

    Редактировать

  9. Nintendo Game Boy Advance SP Brightness Switch Replacement, Brightness Switch: шаг 8, изображение 1 из 1

    • With your fingers, lift the track pad out off the brightness switch.

    • Keep the track pad clean. A dirty or dusty track pad will lead to the brightness switch not working when you press it.

    Редактировать

  10. Nintendo Game Boy Advance SP Brightness Switch Replacement: шаг 9, изображение 1 из 1

    • Using tweezers, lift the brightness switch out of the Game Boy Advance SP.

    Редактировать
Заключение

To reassemble your device, follow these instructions in reverse order.

13 участников успешно повторили данное руководство.

Автор

и 4 других участников

DJ Pantone

Участник с: 01/11/13

1 731 Репутация

Автор 5 руководств

Значки: 14

+11 значков

Команда

Cal Poly, Team 17-22, Forte Winter 2013 Участник Cal Poly, Team 17-22, Forte Winter 2013

CPSU-FORTE-W13S17G22

4 членов

Автор 38 руководств

Один комментарий

Добавить комментарий

Просмотр статистики:

За последние 24часов: 7

За последние 7 дней: 37

За последние 30 дней: 215

За всё время: 16,958