Введение

Keeping your device water-proof is paramount in using it to its full potential. Follow this guide to replace the water-proofing O-ring.

Запчасти

Никакие детали не требуются.

Grasp the clear cover and the white housing and twist the cover counter-clockwise.
  • Grasp the clear cover and the white housing and twist the cover counter-clockwise.

  • The lid may hold fast, but it will come off with some firm twisting.

Добавить комментарий

Lift the lid from the device
  • Lift the lid from the device

  • It may be helpful to use a spudger to pry under the lid if there is difficulty in getting a good grip on the smooth plastic.

Добавить комментарий

  • Using a plastic spudger, lift the o-ring from the lid

Добавить комментарий

  • Gently stretch the new O-ring and place it in position on the clear cover. Make sure it is flush with the flange and not interfering with the locking threads

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Vinny Capone

Участник с: 18.10.2013

549 Репутация

Автор 5 руководств

Команда

University of Maryland, Team 2-4, Gulbrandsen Fall 2013 Member of University of Maryland, Team 2-4, Gulbrandsen Fall 2013

UMD-GULBRANDSEN-F13S2G4

3 членов

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 2

За всё время: 97