Введение

This guide will show how to remove the phone's logic board.

Запчасти

Никакие детали не требуются.

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Free shipping on all orders over 100 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  5. Lift the front cover off.
    • Lift the front cover off.

  6. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

  9. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  10. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

Заключение

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Участник с: 05.10.2010

1 Репутация

Автор 7 руководств

Команда

Cal Poly, Team 22-3, Maness Fall 2010 Member of Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 1

За 30 дней: 2

За всё время: 1,032