Введение

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Запчасти

Никакие детали не требуются.

Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Добавить комментарий

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Добавить комментарий

Grip the front cover from the bottom.
  • Grip the front cover from the bottom.

Добавить комментарий

Lift the front cover off.
  • Lift the front cover off.

Добавить комментарий

Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Добавить комментарий

Insert spudger along edge of assembly and gently lift assembly away from case
  • Insert spudger along edge of assembly and gently lift assembly away from case

Добавить комментарий

Remove assembly from phone
  • Remove assembly from phone

Добавить комментарий

The logic board now sits on top of the phone.
  • The logic board now sits on top of the phone.

Добавить комментарий

Lift the logic board out of the phone.
  • Lift the logic board out of the phone.

Добавить комментарий

Locate battery charger connector
  • Locate battery charger connector

Добавить комментарий

Grasp top and bottom of battery charger connector on the left side
  • Grasp top and bottom of battery charger connector on the left side

Добавить комментарий

Lift out the battery charger connector
  • Lift out the battery charger connector

Добавить комментарий

Grasp vibrator which protrudes from the battery charger connector
  • Grasp vibrator which protrudes from the battery charger connector

Добавить комментарий

Lift the vibrator out of the battery charger connector.
  • Lift the vibrator out of the battery charger connector.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Участник с: 05.10.2010

1 Репутация

Автор 9 руководств

Команда

Cal Poly, Team 22-3, Maness Fall 2010 Member of Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 1,076