To start, press one of the latches at the top of the phone to open the rear cover.
  • To start, press one of the latches at the top of the phone to open the rear cover.

Добавить комментарий

Carefully press the other latch.
  • Carefully press the other latch.

Добавить комментарий

Open rear cover by this side.
  • Open rear cover by this side.

Добавить комментарий

Press the three latches to open this side of the cover.
  • Press the three latches to open this side of the cover.

Добавить комментарий

Remove the rear cover.
  • Remove the rear cover.

Добавить комментарий

Removed rear cover. See  the latches .
  • Removed rear cover. See the latches .

Добавить комментарий

Remove the screws using Torx T6 screw driver.
  • Remove the screws using Torx T6 screw driver.

Добавить комментарий

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove six T6 screws.
  • Remove six T6 screws.

Добавить комментарий

Remove the assembly. The front cover will be released.
  • Remove the assembly. The front cover will be released.

Добавить комментарий

The front cover released.
  • The front cover released.

Добавить комментарий

To remove the display , unscrew the T6 Torx  at top.
  • To remove the display , unscrew the T6 Torx at top.

Добавить комментарий

CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !
  • CAUTION! Remove the bottom screw with T5 Torx screw driver, not T6 !

Добавить комментарий

Carefully disconnect the Flex cable connector. Then remove the display.
  • Carefully disconnect the Flex cable connector. Then remove the display.

Добавить комментарий

Carefully remove the adhesive keyboard membrane.
  • Carefully remove the adhesive keyboard membrane.

  • You can replace it at this step if you need to.

Добавить комментарий

You can clean the keyboard surface with alcohol, if you dropped a drink here.
  • You can clean the keyboard surface with alcohol, if you dropped a drink here.

Добавить комментарий

When you replace the keyboard membrane,  align the two contacts at bottom.
  • When you replace the keyboard membrane, align the two contacts at bottom.

Добавить комментарий

You can wash the front cover and keyboard if they are dirty.
  • You can wash the front cover and keyboard if they are dirty.

Добавить комментарий

Keyboard - clean it if necessary.
  • Keyboard - clean it if necessary.

Добавить комментарий

Rear side of the circuit board.
  • Rear side of the circuit board.

Добавить комментарий

Speaker and antenna contacts.
  • Speaker and antenna contacts.

Добавить комментарий

If necessary, you can replace the joystick, the button module or the connector housing.
  • If necessary, you can replace the joystick, the button module or the connector housing.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

Jose Gustavo Abreu Murta

Участник с: 06.07.2010

2 139 Репутация

Автор 6 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 6,695