Перейти к основному содержанию

Numark TT1600 Belt Drive Replacement

  1. Numark TT1600 Belt Drive Replacement, Belt Drive: шаг 1, изображение 1 из 1
    • Remove slip mat from top of the platter.

  2. Numark TT1600 Belt Drive Replacement: шаг 2, изображение 1 из 1
    • Remove platter by inserting thumbs in holes and slowly pulling up.

    • There will be some initial resistance.

  3. Numark TT1600 Belt Drive Replacement: шаг 3, изображение 1 из 1
    • Remove damaged belt which will be located below the platter.

  4. Numark TT1600 Belt Drive Replacement: шаг 4, изображение 1 из 1
    • Install new belt by securing it around the inner ring, located on the back of the platter.

  5. Numark TT1600 Belt Drive Replacement: шаг 5, изображение 1 из 1
    • Place a thumb in each hole.

    • You should be able to feel the rubber belt.

    • Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

  6. Numark TT1600 Belt Drive Replacement: шаг 6, изображение 1 из 2 Numark TT1600 Belt Drive Replacement: шаг 6, изображение 2 из 2
    • Secure platter back on turntable while keeping belt taut.

    • Pull belt around motor spindle.

    • Gently let go of belt.

  7. Numark TT1600 Belt Drive Replacement: шаг 7, изображение 1 из 1
    • Test turntable by spinning the platter.

    • There should be slight tension causing the platter to come to a stop.

Финишная черта

2 участников успешно повторили данное руководство.

Nikolai

Участник с: 10/12/11

254 Репутация

Автор 5 руководств

Команда

Cal Poly, Team 17-14, Regan Fall 2011 Участник Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 членов

Автор 11 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 8

За последние 30 дней: 44

За всё время: 6,253