Введение
Be aware that most of your time will be spent getting the back off of the device. However, once in the device the repair is quick and easy.
Выберете то, что вам нужно
-
-
Use a Heat Gun to loosen the adhesive around the inside of the device.
-
Use prying tools to lift the back of the device up.
-
-
-
-
Move the wires out of the way and slowly pull the ribbon out of the circuit dock.
-
Почти готово!
To reassemble your device, follow these instructions in reverse order.
Заключение
To reassemble your device, follow these instructions in reverse order.
Команда
University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017 Участник University of Illinois Urbana-Champaign, Team 1-1, Scrogum Spring 2017
UICU-SCROGUM-S17S1G1
3 членов
Автор 19 руководств
