Введение

We will show how to tear down to and remove the LCD screen.

Запчасти

Никакие детали не требуются.

  1. Unscrew all immediately visible screws on the body of the camera. Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).
    • Unscrew all immediately visible screws on the body of the camera.

    • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

  2. Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera. Use the plastic opening tool to separate the back cover from the camera.
    • Use the plastic opening tool to separate the back cover from the camera.

  3. With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen. Unscrew both of these screws. Unscrew both of these screws.
    • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

    • Unscrew both of these screws.

  4. Free shipping on all orders over 100,00 $ or containing a Pro Tech Toolkit!

    Посмотрите наш магазин
  5. Flip the LCD screen over.
    • Flip the LCD screen over.

  6. Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.
    • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

  7. Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard. Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.
    • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

  8. The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera. The LCD screen housing should now be free of the camera.
    • The LCD screen housing should now be free of the camera.

Заключение

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

Участник с: 08.09.2011

21 Репутация

Автор 3 руководств

Команда

University of Maine, Team 1-27, Diaz Fall 2011 Member of University of Maine, Team 1-27, Diaz Fall 2011

UMAINE-DIAZ-F11S1G27

1 член

Автор 3 руководств

Комментариев: 0

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 1

За всё время: 959