Перейти к основному содержанию

One by Wacom Medium Disassembly

Выберете то, что вам нужно

  1. One by Wacom Medium Disassembly, Preparing the device: шаг 1, изображение 1 из 2 One by Wacom Medium Disassembly, Preparing the device: шаг 1, изображение 2 из 2
    • Remove the pen from the pen holder

  2. One by Wacom Medium Disassembly, Remove screws: шаг 2, изображение 1 из 2 One by Wacom Medium Disassembly, Remove screws: шаг 2, изображение 2 из 2
    • Remove four rubber feet to reveal four Phillips #1 screws

    • Remove four Phillips #1 screws

  3. One by Wacom Medium Disassembly, Pry it open: шаг 3, изображение 1 из 2 One by Wacom Medium Disassembly, Pry it open: шаг 3, изображение 2 из 2
    • Use plastic pry tool to open the casing

    • To make this process easier, start prying from corners

    • Continue prying on every side till two casing sides are separated

  4. One by Wacom Medium Disassembly: шаг 4, изображение 1 из 3 One by Wacom Medium Disassembly: шаг 4, изображение 2 из 3 One by Wacom Medium Disassembly: шаг 4, изображение 3 из 3
    • Remove the mainboard from the casing

    • If the USB port has to be replaced, be sure to remove the shielding from the back of the mainboard to avoid damaging it by high temperature

Заключение

To reassemble your device, follow these instructions in reverse order.

00004707

Участник с: 07/23/20

1 055 Репутация

Автор 5 руководств

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 3

За последние 7 дней: 14

За последние 30 дней: 67

За всё время: 2,436