Перейти к основному содержанию

Opening the Galaxy Watch

Выберете то, что вам нужно

  1. Opening the Galaxy Watch, Opening Procedure: шаг 1, изображение 1 из 1
    • Remove the four Tri-point #00 screws (4.2 mm length) on the backside of the watch.

  2. Opening the Galaxy Watch: шаг 2, изображение 1 из 2 Opening the Galaxy Watch: шаг 2, изображение 2 из 2
    • Use an opening tool to get between the back cover and the metal housing of the watch.

    • Carefully pry the plastic back cover open.

    • Don't remove the back cover yet. There is a flex cable running to the core assembly inside.

  3. Opening the Galaxy Watch: шаг 3, изображение 1 из 2 Opening the Galaxy Watch: шаг 3, изображение 2 из 2
    • Lay down the watch and lift the back cover to access the sensor connector on the motherboard.

  4. Opening the Galaxy Watch: шаг 4, изображение 1 из 2 Opening the Galaxy Watch: шаг 4, изображение 2 из 2
    • Use a spudger to disconnect the sensor flex cable from the motherboard.

  5. Opening the Galaxy Watch: шаг 5, изображение 1 из 3 Opening the Galaxy Watch: шаг 5, изображение 2 из 3 Opening the Galaxy Watch: шаг 5, изображение 3 из 3
    • Remove the back cover.

    • When closing the watch make sure the rubber gasket is undamaged or replace it with a new one.

Заключение

To reassemble your device, follow these instructions in reverse order.

5 участников успешно повторили данное руководство.

Tobias Isakeit

Участник с: 03/31/14

116 767 Репутация

Автор 188 руководств

Команда

Master Techs Участник Master Techs

Community

322 членов

Автор 2 506 руководств

Один комментарий

I got 3 out of 4 screws out 1 screw just won't come out need help

peck24hi.mp - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 5

За последние 7 дней: 46

За последние 30 дней: 194

За всё время: 10,190