Skip to main content

Введение

Learn how to take apart the Osmo Mobile handle in order to gain access to other repairs such as the joystick, Bluetooth apparatus, trigger buttons and the charging port.

  1. Remove gimbal from base handle by loosening round plate found at the top of the handle. Remove gimbal from base handle by loosening round plate found at the top of the handle.
    • Remove gimbal from base handle by loosening round plate found at the top of the handle.

  2. Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal. Carefully detach handle from gimbal and disconnect the cable that connects the two.
    • Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal.

    • Carefully detach handle from gimbal and disconnect the cable that connects the two.

  3. Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас

    Android Fix Kits

    A new screen or battery is one kit away.

    Купить сейчас
  4. Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.
    • Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.

  5. Remove joystick by gently pulling away from handle Remove joystick by gently pulling away from handle
    • Remove joystick by gently pulling away from handle

  6. Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers. Use the spudger to pry open and remove the face plate, starting at the back of the handle. Use the spudger to pry open and remove the face plate, starting at the back of the handle.
    • Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers.

    • Use the spudger to pry open and remove the face plate, starting at the back of the handle.

  7. Locate four screws directly on top of handle. Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver. Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.
    • Locate four screws directly on top of handle.

    • Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver.

    • Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.

    • Remove the remaining two screws found on the front of the faceplate.

    • Remove the rest of the face plate shell.

Итог

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Ustena Safa

Участник с: 28.09.2017

309 Reputation

Автор 2 руководств

Team

USF Tampa, Team S2-G1, Nance Fall 2017 Member of USF Tampa, Team S2-G1, Nance Fall 2017

USFT-NANCE-F17S2G1

4 членов

Автор 6 руководств

2 Comments

Bonjour,

La toute première étape est trop vague pouvez-vous donner plus de détails svp.

Je vous remercie d’avance

Guitt97ii - Ответить

I would not call that a handle disassembly. This instruction takes you up to the things you need to do PRIOR to disassembly.

I can show you the rest in a video format if you’re interested

John M O'Donovan - Ответить

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 32

Past 30 Days: 125

All Time: 3,593