Перейти к основному содержанию

Osmo Mobile Handle Disassembly

Выберете то, что вам нужно

  1. Osmo Mobile Handle Disassembly, Osmo Mobile Handle Disassembly: шаг 1, изображение 1 из 2 Osmo Mobile Handle Disassembly, Osmo Mobile Handle Disassembly: шаг 1, изображение 2 из 2
    • Remove gimbal from base handle by loosening round plate found at the top of the handle.

    This step isn't clear. How is the ring removed? Twist? Pry?

    Jo Dee Lee - Ответить

    Same question for me

    Guitt97ii -

    Tried for hours. Seems it’s glued on?

    Jo Dee Lee - Ответить

    ok, the top cap is screwed on. I used a double sided tape around it to have a better grip and just twisted it. The cap has thread lock in it.

    Jo Dee Lee - Ответить

    You passed this step?

    Guitt97ii -

    U passed this step???

    Guitt97ii -

    No solution for this step?

    Guitt97ii - Ответить

  2. Osmo Mobile Handle Disassembly: шаг 2, изображение 1 из 2 Osmo Mobile Handle Disassembly: шаг 2, изображение 2 из 2
    • Use Phillips #00 screwdriver to remove the three screws found on the gimbal stabilizer to detach handle from gimbal.

    • Carefully detach handle from gimbal and disconnect the cable that connects the two.

  3. Osmo Mobile Handle Disassembly: шаг 3, изображение 1 из 1
    • Locate the hex screws found at the top base of the handle, and unscrew using the 1.5mm hex screwdriver.

  4. Osmo Mobile Handle Disassembly: шаг 4, изображение 1 из 2 Osmo Mobile Handle Disassembly: шаг 4, изображение 2 из 2
    • Remove joystick by gently pulling away from handle

  5. Osmo Mobile Handle Disassembly: шаг 5, изображение 1 из 3 Osmo Mobile Handle Disassembly: шаг 5, изображение 2 из 3 Osmo Mobile Handle Disassembly: шаг 5, изображение 3 из 3
    • Remove the quick release PCBA by locating the connecting wires and release the ribbon cable with tweezers.

    • Use the spudger to pry open and remove the face plate, starting at the back of the handle.

  6. Osmo Mobile Handle Disassembly: шаг 6, изображение 1 из 3 Osmo Mobile Handle Disassembly: шаг 6, изображение 2 из 3 Osmo Mobile Handle Disassembly: шаг 6, изображение 3 из 3
    • Locate four screws directly on top of handle.

    • Unscrew the silver, bottom two screws, that are closest to the face plate using the 00 screwdriver.

    • Unscrew the black, top two screws, located furthest from the face plate, using the 0 screwdriver.

    • Remove the remaining two screws found on the front of the faceplate.

    • Remove the rest of the face plate shell.

    hola alguien sabe donde puedo adquirir la face plate shell de refaccion?

    gracias

    jose - Ответить

    I know. - Nowhere. You need buy another gimbal (non-working) for a parts. By the way, it will be good to make a manual for other disassembling of a gimbal - I mean rotating parts. Some info of this can be found in this video on Youtube: https://www.youtube.com/watch?v=-5Xi-b8s...

    But not too much :(

    nik_gmp - Ответить

Заключение

To reassemble your device, follow these instructions in reverse order.

2 участников успешно повторили данное руководство.

Ustena Safa

Участник с: 09/28/17

330 Репутация

Автор 2 руководств

Команда

USF Tampa, Team S2-G1, Nance Fall 2017 Участник USF Tampa, Team S2-G1, Nance Fall 2017

USFT-NANCE-F17S2G1

4 членов

Автор 12 руководств

10 Комментариев

Bonjour,

La toute première étape est trop vague pouvez-vous donner plus de détails svp.

Je vous remercie d’avance

Guitt97ii - Ответить

I would not call that a handle disassembly. This instruction takes you up to the things you need to do PRIOR to disassembly.

I can show you the rest in a video format if you’re interested

John M O'Donovan - Ответить

Could you please show me how to fix the USB port that wenr inside the handle? on my Smove gimbal stabilizer

Juan Carlos Beltran -

My osmo has snapped off at the metal camera attachment. Can this be repaired ?

michelle Moore - Ответить

Your help would be greatly appreciated

Emile Jansen -

Hi Michelle… The same happened to me… have you gotten yours repaired.?

Emile Jansen - Ответить

Hi,

I need to replace my osmo clamp disc and locking knob that hold the phone in place.

I was give this without a manual and snapped the locking knob off.

I thought it had been over tightened.

I was meant to pop it to release the clamp arms and then loosen and lock.

I’ve unscrew the magnet in front and seen behind, I’ve snapped the small screw but half the screw in the other end of the knob.

many thanks.

David Williamson - Ответить

what I want to know is where do buy the top face plate?

Irving Aguilera - Ответить

I'd like to know where to buy the face plate shell shown being removed in the third jpg in step 6?

Irving Aguilera - Ответить

Is there any tutorial for DJI Osmo 4?, I need help repairing my OSMO 4 battery. But cant find anything in the internet

Vince Pastor - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 9

За последние 30 дней: 55

За всё время: 7,957