Перейти к основному содержанию

Введение

This guide shows you how to remove the PSP Go's left trigger buttons.

  1. Use a plastic opening tool to gently flip up the left trigger connector.
    • Use a plastic opening tool to gently flip up the left trigger connector.

  2. Unscrew the lone Phillips screw holding the trigger in place. Remove both trigger and retaining plate from the PSP Go. If necessary, repeat steps 2 and 3 to remove the right trigger button.
    • Unscrew the lone Phillips screw holding the trigger in place. Remove both trigger and retaining plate from the PSP Go.

    • If necessary, repeat steps 2 and 3 to remove the right trigger button.

Заключение

To reassemble your device, follow these instructions in reverse order.

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

За всё время: 1,276