Перейти к основному содержанию

Введение

Removing the batteries is a very simple process that is also a preliminary step to gaining access to the inside of the device.

  1. Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover.
    • Turn the device over so it is face down and remove the stylus, and battery cover.

  2. Now remove the two batteries by pulling on the cloth black tab. Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.
    • Now remove the two batteries by pulling on the cloth black tab.

    • Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.

    • If this tab is not visible, use the flat head screwdriver and gently pry out the batteries by pushing on the positive end (opposite the spring).

Заключение

To reassemble your device, follow these instructions in reverse order.

Jacob

Участник с: 15.04.2010

1 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 16-1, Maness Spring 2010 Member of Cal Poly, Team 16-1, Maness Spring 2010

CPSU-MANESS-S10S16G1

4 членов

Автор 4 руководств

Добавить комментарий

Просмотр статистики:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

За всё время: 1,579