Введение

Replace the keyboard!!

Запчасти

Никакие детали не требуются.

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Добавить комментарий

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

Добавить комментарий

Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

Добавить комментарий

Using a T6 Torx Screwdriver, remove the two screws. The motherboard will now be loose from the front case.
  • Using a T6 Torx Screwdriver, remove the two screws.

  • The motherboard will now be loose from the front case.

Добавить комментарий

Using the spudger, flip open the clasp that holds the data ribbon in place.
  • Using the spudger, flip open the clasp that holds the data ribbon in place.

Добавить комментарий

Pull out the ribbon.
  • Pull out the ribbon.

  • The keyboard will disconnect from the phone.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Участник с: 26.01.2010

24 Репутация

Автор 14 руководств

Команда

Cal Poly, Team 13-23, Maness Winter 2010 Member of Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 членов

Автор 16 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,410