Введение

Replace the speaker

Запчасти

Никакие детали не требуются.

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Добавить комментарий

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

Добавить комментарий

Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

Добавить комментарий

Using the spudger, pull the speaker straight up.
  • Using the spudger, pull the speaker straight up.

Добавить комментарий

Gently pull the rubber coating off of the speaker.
  • Gently pull the rubber coating off of the speaker.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Member since: 26.01.2010

24 Репутация

Автор 14 руководств

Команда

Cal Poly, Team 13-23, Maness Winter 2010 Member of Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 членов

Автор 16 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,448