Перейти к основному содержанию

Palm m105 Batteries Replacement

  1. Palm m105 Batteries Replacement, Batteries: шаг 1, изображение 1 из 1
    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

  2. Palm m105 Batteries Replacement: шаг 2, изображение 1 из 1
    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

  3. Palm m105 Batteries Replacement: шаг 3, изображение 1 из 1
    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

Заключение

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Участник с: 10/04/11

31 Репутация

Автор 5 руководств

Команда

UW Stout, Team 1-3, Zhou Fall 2011 Участник UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 членов

Автор 7 руководств

Один комментарий

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 4

За всё время: 1,226