Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.
Выберете то, что вам нужно
-
Этот шаг не переведен. Помогите перевести
-
Remove the following eleven screws securing the covers to the ZS3
-
Eleven 3 mm Phillips screws
-
-
Этот шаг не переведен. Помогите перевести
-
Use the flat end of a spudger to pry apart the back cover from the rest of the unit as shown.
-
-
Этот шаг не переведен. Помогите перевести
-
Using your fingernail or a spudger, flip up the ZIF locking flap on the two LCD ribbon cable sockets that connect the back cover to the rest of the unit.
-
-
Этот шаг не переведен. Помогите перевести
-
Remove the two LCD board ribbon cables out of their sockets.
-