Введение

Use this guide to replace, propellers, shafts, and gears on a Parrot AR.Drone 2.0.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

Запчасти

Никакие детали не требуются.

Video Overview

Remove the foam body.
  • Remove the foam body.

Добавить комментарий

Disconnect the battery by pulling the two red wires apart.
  • Disconnect the battery by pulling the two red wires apart.

  • Remove the battery by releasing the battery retaining straps.

how do i put the clips back in?

kuki vier - Ответить

Are you referring to the clips in step three? If so, i highly recommend a hard, flat edged tool like a plastic spudger or flat head screw driver. Push is against the opposite side of the C clip that is opened with roughly the same force you applied to get it off. You have to be really careful that you push it directly horizontal or else you might damage the shaft or risk loosing the clip if it pops off.

David Hoyt -

  • Remove the small retaining clip using a plastic opening tool.

  • Be careful as these clips can fly off and can be difficult to find.

Добавить комментарий

  • The propeller, gear, and rod can be removed by simply lifting them off the motor.

Добавить комментарий

Заключение

To reassemble your device, follow these instructions in reverse order.

3 участников успешно повторили данное руководство.

David Hoyt

Участник с: 09.04.2010

3 626 Репутация

Автор 43 руководств

Команда

Cal Poly, Team 25-89, Amido Spring 2010 Member of Cal Poly, Team 25-89, Amido Spring 2010

CPSU-AMIDO-S10S25G89

4 членов

Автор 52 руководств

Один комментарий

any idea how to change the little gear?

Dar BS - Ответить

Добавить комментарий

Просмотр статистики:

За 24 часа: 3

За 7 дней: 14

За 30 дней: 106

За всё время: 5,126