Перейти к основному содержанию

Введение

Power cords can become easily broken or frayed, which can cause potential risks. This guide will teach you how to replace a damaged or broken power cord for the Philips DVP5992-F7.

Инструменты

Запчасти

Детали не указаны.

  1. Philips DVP5992-F7 Power Cord Replacement, Power Cord: step 1, image 1 of 3 Philips DVP5992-F7 Power Cord Replacement, Power Cord: step 1, image 2 of 3 Philips DVP5992-F7 Power Cord Replacement, Power Cord: step 1, image 3 of 3
    • Remove the three 6.4 mm Phillips #1 screws on the back of the device with a Phillips head screwdriver.

    • Remove the 6.4 mm Phillips #1 screws on each side of the device.

  2. Philips DVP5992-F7 Power Cord Replacement: step 2, image 1 of 2 Philips DVP5992-F7 Power Cord Replacement: step 2, image 2 of 2
    • Remove the top plate of the DVD by firmly grasping the player on both sides.

    • Shift the top plate towards the backside of the player.

    • Lift the back half of the top plate up to remove it from the player.

  3. Philips DVP5992-F7 Power Cord Replacement: step 3, image 1 of 3 Philips DVP5992-F7 Power Cord Replacement: step 3, image 2 of 3 Philips DVP5992-F7 Power Cord Replacement: step 3, image 3 of 3
    • Locate the power cable connector inside the DVD player.

    • Pinch down on both sides of the cable connector.

    • Gently pull upwards on the cable connector while wiggling it to remove it from the DVD player.

Заключение

To reassemble your device, follow these instructions in reverse order.

Dyllon Phuong

Участник с: 31.08.2018

513 Репутация

Автор 3 руководств

Команда

Western Carolina University, Team S1-G6, Virtue Fall 2018 Участник Western Carolina University, Team S1-G6, Virtue Fall 2018

WCU-VIRTUE-F18S1G6

3 членов

Автор 9 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 4

За последние 30 дней: 8

За всё время: 262