Введение

The base unit and headset are synchronized together when you bought them. So if you want to use a replacement headset with the base unit (or if you lose your connection to the base unit) you will need to follow these steps to synchronize the headset to the base:

  1. Ensure the headset is in the base's cradle.
    • Ensure the headset is in the base's cradle.

    Добавить комментарий

  2. Press the volume control buttons on the back of the base until the front of the base flashes red.
    • Press the volume control buttons on the back of the base until the front of the base flashes red.

    Добавить комментарий

    • Press the mute switch on top of the headset until the green light on the headset turns on.

    Добавить комментарий

    • Unplug the power cord for five seconds. After the five seconds are over, reconnect the power cord.

    Добавить комментарий

    • When the flashing red light becomes solid, synchronization is complete.

    Добавить комментарий

Финишная черта

2 участников успешно повторили данное руководство.

Joe

Участник с: 12.04.2012

79 Репутация

Автор 3 руководств

Команда

Cal Poly, Team 17-29, Amido Spring 2012 Member of Cal Poly, Team 17-29, Amido Spring 2012

CPSU-AMIDO-S12S17G29

4 членов

Автор 7 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 0

За всё время: 1,651